=========================================================== BUFFALO BBR-4MG Loader v1.80 build Dec 12 2003 10:13:58 Broad Net Technology, INC. =========================================================== manu_id=6000 chip_id=401A INTEL TE28F160C3-B bottom boot 16-bit mode found Copying boot params.....DONE Press any key to enter command mode ... Press Reset button to enter Tiny_ETCPIP_KERNEL ... Flash Checking Passed. Unzipping program from bank 2...done Try to find image for running... Unzipping program from bank 3...done U-Boot 1.1.4 (Oct 5 2006 - 04:34:31) DRAM: 8 MB Top of RAM usable for U-Boot at: 80800000 Reserving 181k for U-Boot at: 807d0000 Reserving 2624k for malloc() at: 80540000 Reserving 44 Bytes for Board Info at: 8053ffd4 Reserving 36 Bytes for Global Data at: 8053ffb0 Reserving 128k for boot params() at: 8051ffb0 Stack Pointer at: 8051ff98 Now running in RAM - U-Boot at: 807d0000 flash_protect ON: from 0xBFC20000 to 0xBFC2FFFF protect on 9 Flash: 2 MB In: serial Out: serial Err: serial Net: adm0 Hit any key to stop autoboot: 0 ## Booting image at bfd10000 ... Image Name: Created: 2006-10-16 7:41:50 UTC Image Type: MIPS Linux Kernel Image (bzip2 compressed) Data Size: 921848 Bytes = 900.2 kB Load Address: 80001000 Entry Point: 8022a040 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... CPU revision is: 0001800b Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB, 2-way, linesize 16 bytes. Linux version 2.4.33 (thomas@mikan.stm.fenix.ne.jp.private) (gcc version 3.4.2) #2 2006年 10月 16日 月曜日 14:32:11 JST System no PCI BIOS Determined physical RAM map: memory: 00800000 @ 00000000 (usable) On node 0 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,${baudrate} root=/dev/sda1 CPU clock: 175MHz Using 87.500 MHz high precision timer. Calibrating delay loop... 174.48 BogoMIPS Memory: 5512k/8192k available (2199k kernel code, 2680k reserved, 108k data, 92k init, 0k highmem) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded pty: 256 Unix98 ptys configured ADM5120 serial driver 0.01 2003-04-17 loop: loaded (max 8 devices) ADM5120 Switch Module: irq 17 ADM5120 Switch Module: VLAN groups 0:5f PPP generic driver version 2.4.2 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 cfi_cmdset_0001: Erase suspend on write enabled Using word write method Creating 6 MTD partitions on "BBR4 FLASH ROM": 0x00000000-0x00020000 : "Boot" 0x00020000-0x00040000 : "Configuration" 0x00040000-0x00080000 : "Web Image" 0x00080000-0x00100000 : "Code Image" 0x00100000-0x00110000 : "Boot Params" 0x00110000-0x00200000 : "Linux Kernel" usb.c: registered new driver usbdevfs usb.c: registered new driver hub Start Init AHCI_INIT Oct 16 2006 USB AHCI at membase 0xb1200000, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) ip_conntrack version 2.1 (64 buckets, 512 max) - 288 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ip6_tables: (C) 2000-2002 Netfilter core team kmod: failed to exec /sbin/modprobe -s -k block-major-8, errno = 2 VFS: Cannot open root device "sda1" or 08:01, retrying in 1s. hub.c: new USB device adm5120-hcd-1, assigned address 2 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: IBM Model: Memory Key Rev: G510 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 64000 512-byte hdwr sectors (33 MB) sda: Write Protect is off Partition check: sda: sda1 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 92k freed Algorithmics/MIPS FPU Emulator v1.5 mounting proc filesystem. root filesystem found from /proc/mounts: /dev/root ext2 checking root filesystem consistency./dev/sda1 has gone 46861 days without being checked, check for ced. /dev/sda1: 562/8000 files (1.2% non-contiguous), 8802/31984 blocks remounting root filesystem (opt: rw). mounting /tmp. . checking filesystems. mounting other filesystems: /dev/pts Initializing random number generator... done. Starting network... Generating RSA Key... Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key' Generating key, this may take a while... Public key portion is: : Fingerprint: md5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Generating DSS Key... Will output 1024 bit dss secret key to '/etc/dropbear/dropbear_dss_host_key' Generating key, this may take a while... Public key portion is: : Fingerprint: md5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Starting dropbear sshd: OK . Please press Enter to activate this console. BusyBox v1.2.1 (2006.10.12-10:11+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. / $ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/sda1 30969 7790 21580 27% / none 2800 16 2784 1% /tmp / $ ls bin home lost+found proc tmp dev lib mnt root usr etc linuxrc opt sbin var / $ ifconfig eth0 inet 192.168.1.16 / $ ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:01:1B:44:BE inet addr:192.168.1.16 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: 2001:c90:6525:452:216:1ff:fe1b:44be/64 Scope:Global inet6 addr: fe80::216:1ff:fe1b:44be/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:347 (347.0 B) TX bytes:316 (316.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:822 (822.0 B) TX bytes:822 (822.0 B) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) / $