========================================================== BUFFALO BBR-4MG Loader v1.80 build Dec 12 2003 10:13:58 Broad Net Technology, INC. =========================================================== manu_id=6000 chip_id=401A INTEL TE28F160C3-B bottom boot 16-bit mode found Copying boot params.....DONE Press any key to enter command mode ... Press Reset button to enter Tiny_ETCPIP_KERNEL ... Flash Checking Passed. Unzipping program from bank 2...done Try to find image for running... Unzipping program from bank 3...done U-Boot 1.1.4 (Oct 5 2006 - 04:34:31) DRAM: 8 MB Top of RAM usable for U-Boot at: 80800000 Reserving 181k for U-Boot at: 807d0000 Reserving 2624k for malloc() at: 80540000 Reserving 44 Bytes for Board Info at: 8053ffd4 Reserving 36 Bytes for Global Data at: 8053ffb0 Reserving 128k for boot params() at: 8051ffb0 Stack Pointer at: 8051ff98 Now running in RAM - U-Boot at: 807d0000 flash_protect ON: from 0xBFC20000 to 0xBFC2FFFF protect on 9 Flash: 2 MB In: serial Out: serial Err: serial Net: adm0 Hit any key to stop autoboot: 0 BBR-4MG/HG # tftp 0x80002000 netbsd-admsw0.bin Using adm0 device TFTP from server 192.168.1.14; our IP address is 192.168.1.16 Filename 'netbsd-admsw0.bin'. Load address: 0x80002000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################### done Bytes transferred = 2114496 (2043c0 hex) BBR-4MG/HG # go 0x80002000 ## Starting application at 0x80002000 ... bad argv[0] (0x80002000) bad argv[0] (0x80002000) Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.38 (BBR4MG) #21: Mon Dec 31 23:09:17 JST 2007 kawauchi@KUROBOX:/mnt/work/evbmips/current-4.99.39/src/sys/arch/evbmips/compile/oG Infineon ADM5120 total memory = 8192 KB avail memory = 5692 KB mainbus0 (root) gpio0 at mainbus0: 8 pins cpu0 at mainbus0: 175.00MHz (hz cycles = 170898, delay divisor = 87) cpu0: MIPS 4Kc (0x1800b) Rev. 11 with software emulated floating point cpu0: 8KB/16B 2-way set-associative L1 Instruction cache, 16 TLB entries cpu0: 8KB/16B 2-way set-associative write-back L1 Data cache obio0 at mainbus0 uart0 at obio0 addr 0x12600000 console uart1 at obio0 addr 0x12800000 admsw0 at obio0 addr 0x12000000: ADM5120 Switch Engine, 6 ports admsw0: base Ethernet address 02:aa:bb:cc:dd:ee ahci0 at obio0 addr 0x11200000 usb0 at ahci0: USB revision 1.1 uhub0 at usb0 uhub0: ADMTek ADM5120 root hub, class 9/0, rev 1.01/0.00, addr 1 uhub0: 2 ports with 2 removable, self powered admflash at obio0 addr 0x1fc00000 not configured extio0 at mainbus0 extio0: WAIT# active; may be stuck wdc at extio0 cfio addr 0x10c00000 gpio_mask 0x10 not configured admpci at mainbus0 not configured umass0 at uhub0 port 1 configuration 1 interface 0 umass0: IBM Memory Key, rev 1.10/2.2a, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: fabricating a geometry sd0: 32000 KB, 31 cyl, 64 head, 32 sec, 512 bytes/sect x 64000 sectors root on admsw0 nfs_boot: trying DHCP/BOOTP admsw_intr: pending=40008 nfs_boot: DHCP next-server: 192.168.1.14 nfs_boot: my_addr=192.168.1.16 nfs_boot: my_mask=255.255.255.0 root on 192.168.1.14:/export/evbmips-el WARNING: no TOD clock present WARNING: using filesystem time WARNING: CHECK AND RESET THE DATE! Sat Jan 5 07:31:20 UTC 2008 Starting file system checks: Setting tty flags. Setting sysctl variables: Starting network. Hostname: bbr4mg IPv6 mode: host Configuring network interfaces:. add net default: gateway 192.168.1.1 Adding interface aliases: Building databases: dev, utmp, utmpx done Starting syslogd. Checking for core dump... savecore: can't find device 1282/524600 Jan 5 07:31:36 bbr4mg savecore: can't find device 1282/524600 Mounting all filesystems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: adding nbsd:/export/swap as swap device at priority 0 Starting virecover. Starting local daemons:. Updating motd. Starting inetd. Starting cron. Sat Jan 5 07:31:44 UTC 2008 NetBSD/evbmips (bbr4mg) (console) login: root Jan 5 07:31:50 bbr4mg login: ROOT LOGIN (root) ON console Last login: Sat Jan 5 07:31:53 2008 on console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.38 (BBR4MG) #21: Mon Dec 31 23:09:17 JST 2007 Welcome to NetBSD! This system is running a development snapshot of the NetBSD operating system, also known as NetBSD-current. It is highly possible for it to contain serious bugs, regressions, broken features or other problems. Please bear this in mind and use the system with care. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: http://www.NetBSD.org/support/send-pr.html Thank you for helping us test and improve NetBSD. Terminal type is vt100. We recommend creating a non-root account and using su(1) for root access. bbr4mg# usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, ADM5120 root hub(0x0000), ADMTek(0x04ce), rev0 port 1 addr 2: full speed, power 100 mA, config 1, Memory Key(0x8888), IBM(0x0a16), rev 0 port 2 powered bbr4mg# stty erase ^H bbr4mg# mount /dev/sd0a /mnt sd0: fabricating a geometry /dev/sd0a: file system not clean (fs_clean=10); please fsck(8) /dev/sd0a: lost blocks 0 files 0 bbr4mg# df umass0: BBB reset failed, IOERROR Filesystem 1K-blocks Used Avail %Cap Mounted on 192.168.1.14:/export/evbmips-el 29279404 16100506 13178898 54% / nbsd:/export/swap 29279404 16100506 13178898 54% /swap /dev/sd0a 30943 1 29395 0% /mnt bbr4mg#