Mon 10/30, 2006

USL-5P [Computer and Networking ]

USL-5P.jpgLANDISK が面白いので USL-5P にも手を出した。基本的には同じようなもの。 [LANDISKで漕ぎいでな〜♪]の通りに USL-5Pオリジナルシステムとdebian26のデュアルブート環境を構築。1GB の MicroDrive を使用した。 [mizore Wiki] とこの辺り[]の情報を元にシリアルコンソールをつなぐ準備をして次のステップに備える。

USL-5P のケースを開け、基板にピンヘッダを半田付けし、2.54mm ピッチ4ピンコネクタでレベルコンバータに引き出す。ケースのこの部分をカットしておけば、ケースを閉じたままでシリアルコンソールに接続できる。コンバータはいい加減な空中配線で、まだ絶縁処理もしていない。インストールした環境では 9600baud, non parity, stop 1 bit とする。一部文字化けがあるが、boot 時のコンソール出力内容。

SH IPL+g version 0.9, Copyright (C) 2000 Free Software Foundation, Inc.

This software comes with ABSOLUTELY NO WARRANTY; for details type `w'.
This is free software, and you are welcome to redistribute it under
certain conditions; type `l' for details.

2002/09/09 Making.  2004/09/08 I-O DATA NSU Update.
266:133:33 on base clock 22.22MHz and SDRAM 4 burst. CF boot.

PCIC initialization done.
MASTER:48bit LBA mode non support
Disk drive detected: IBM-DSCM-11000 SC2IC915             KHPK5603 
LBA: 00201D80
DiskSize: 1077608448Byte
> b
Set Transfer Mode result: 51 
Initialize Device Parameters result: 50 
IDLE result: 50 
LILO boot: 

Loading USL-5P....................done.
*version 2.4.21 (ulinux@ELITEPC) (gcc version 3.2.3) #50 2005年 1月 27日 木曜日 21:58:49 JST
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=301 mem=64M console=ttySC1,9600 root=/dev/hda1
CPU clock: 266.68MHz
Bus clock: 133.34MHz
Module clock: 33.33MHz
Interval = 5207
Calibrating delay loop... 266.24 BogoMIPS
Memory: 62668k/65536k available (1659k kernel code, 2868k reserved, 271k data, 52k init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: SH7751R
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
SH7751R PCI: Finished initialization of the PCI controller
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Allocate Area5/6 success.
Julian Shutdown button driver initialized
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996
NTFS driver 2.1.6b [Flags: R/O].
pty: 256 Unix98 ptys configured
SuperH SCI(F) driver initialized
ttySC0 at 0xffe00000 is a SCI
ttySC1 at 0xffe80000 is a SCIF
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: IBM-DSCM-11000, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 10
hda: attached ide-disk driver.
hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
ide-floppy driver 0.99.newide
Partition check:
 hda: [PTBL] [522/64/63] hda1 hda2 hda3
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
 hda: hda1 hda2 hda3
 hda: hda1 hda2 hda3
 hda: hda1 hda2 hda3
 hda: hda1 hda2 hda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
・nit started:  BusyBox v0.60.5 (2004.07.22-09:20+0000) multi-call binary
Mounting proc filesystem:  [  OK  ]
Configuring kernel parameters:  [  OK  ]
Timed out waiting for time change.
Setting clock  (localtime): Mon Oct 30 21:30:53 JST 2006 [  OK  ]
Setting hostname usl-5p:  [  OK  ]
Mounting USB filesystem:  [  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Finding module dependencies:  [  OK  ]
Checking filesystems
Checking all file systems.
[  OK  ]
Mounting local filesystems:  [  OK  ]
Setting network parameters:  [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Starting portmapper: [  OK  ]
Starting httpd: [  OK  ]
Starting SMB services: [  OK  ]
Starting NMB services: [  OK  ]
Starting crond: [  OK  ]
Starting button_daemon:  [  OK  ]
Start Shutdown button surveillance
Starting usbhdmng:  [  OK  ]
getty: ioctl() 
Lineo Linux
Kernel 2.4.21 on an sh4
usl-5p. login: 

NetBSD 入れました

Posted by masato at 10:03 PM